DIY PoE-enabled gigabit router

THIS BLOGPOST IS CURRENTLY A WORK IN PROGRESS

All ethernet ports are connected to center-tapped transformers, to isolate the noisy cable lines from the very sensitive integrated circuits of the ethernet controller chipset.
The interesting thing is that the center-tapped transformers used in gigabit ports can be used to extract phantom power from the ethernet data lines.

The Ubiquiti AirFiber 24Ghz uses the following standard:

(+) = Pair 1/2 & 4/5 = Orange & Blue pairs
(-) = Pair 3/6 & 7/8 = Green & Brown pairs

Licencia Creative Commons
Esta obra está bajo una Licencia Creative Commons Atribución-CompartirIgual 4.0 Internacional.